Campbell Scientific RTDAQ Software - Manual (Page 116)

Section 5. Program Creation and Editing
5.3.4.9 Edit | CR9000X Generator Options, Edit | CR5000 Generator
Options
You can find the Generator Options on the Edit menu for the particular kind
of generator project you are currently using. Set the desired settings to be used
by default when a program generator project is created or a CRBasic program
is generated. Check the boxes next to the options that are desired or set the
value of the drop-down box. Press Done to save the desired configuration.
The Set Defaults button may be used to return the configuration to the default
settings.
5.3.4.10 Help | Program Generator
This item opens the online help for the RTDAQ Program Generator application.
5.3.4.11 Help | About
This screen shows the version number and release date of the RTDAQ
Program Generator application.
5.3.5 Using Save and Send
The RTDAQ Program Generator program allows you to send a program to a
datalogger that has been defined in the RTDAQ Network Map. This only
works if RTDAQ is running at the time you attempt to send the program. The
main screen of the Program Generator displays a Save and Send button that
you can press to do this.
5-56