Campbell Scientific RTDAQ Software - Manual (Page 184)

Section 7. Monitoring Data in Real-time
7.6.2 Setting up
To set up values for display on the XY Plot, you can add one or more
y-axis values and one x-axis value. The x-axis value will be used as the
independent (horizontal) axis, and the y-axis values will be plotted with their
values placed horizontally to match the x-axis value, and their actual values
given as the y-axis values.
7.6.2.1 Setting Values for Display
the XY Plot for Display
To add a y-axis value to the XY Plot window, place a measurement onto the
numeric monitoring area labeled Y Axis Values. You can add one or more
traces from the same table, or from different tables. Press the Add Y Value
button . Navigate through the Tables pane of the Add Selection screen or
select an entire table. Select the desired field. Press Paste or drag and drop
your selection into the Y Axis Values area. You can use the Stay on Top or
List Alphabetically options of the Add Selection screen to make your
selection process easier. The name of the measurement will appear, and the
current value will be displayed next to it after the XY Plot window has been
started.
7-32