Campbell Scientific RTDAQ Software - Manual (Page 215)

Section 7. Monitoring Data in Real-time
7.9.8.4 Individual Trace Options
ns button.
The Trace options are a tab on the main Options dialog box. They can also be
opened by pressing the Trace Optio
7.9.8.4.1 Display Tab
s
e
ith lines). Use the Line Style drop-
7.9.8.4.2 Marks Tab
x
rs
ark should be round instead of pointed (square). Choose the
Transparent check box if you wish the background of each mark to be
transparent (the same color as the display background). Set the Draw Every
spin box with a value greater than 1 if you wish for only some of the points to
display an associated mark. A setting of “1” will display a mark on every
point. You can also choose the color and fill style of the box in which the
markings text is shown with the Color and Style selections. Use the Style
drop-down box to determine what information from each axis will be
displayed.
The Trace tab on the Graphing Options window has two subtabs: Display
and Marks. The Display tab is used to set the color used for the bins or line
on the FFT/Histogram display when Color Each Bin is not selected. Use th
Line Width setting to select the width of the line used to connect bin values
together (if you are connecting points w
down to choose what kind of line will be drawn (dotted, dashed, solid, etc.).
You can also use the Symbol Style drop-down to choose a symbol to be used
for displaying the points on the spectrum.
You can select the Marks tab if you want to show markers on the
FFT/Histogram display and to control how they are shown. Marks can
contain information about a specific bin, such as its value on the current y-axis
or the bin number that applies to the point. Select the Show Marks check bo
to use marks on the display. Select the Round Frame check box if the corne
of the m
7-63