Campbell Scientific RTDAQ Software - Manual (Page 186)

Section 7. Monitoring Data in Real-time
The name of the measurement will appear, and the current value will be
.
Points per Field
displayed next to it after the XY Plot window has been started
7.6.2.2 Number of
You may set the Number of Points per Field displayed on the plot. This
e number represents how many points (x-y ordered pairs) will be placed onto th
plot before each new point causes the oldest point to be removed. This
controls how many points for each y-axis measurement can be displayed at one
time. The minimum value that can be used is five and the maximum value that
can be used is 10,000.
7-34