Campbell Scientific RTDAQ Software - Manual (Page 193)

Section 7. Monitoring Data in Real-time
(An example of an XY Plot screen with its controls hidden.)
Choose the Hide Controls option to temporarily remove all interface elements
(buttons and display controls) used to configure the XY Plot window. This
removes the Y Axis Values, X Axis Value, #of Points Per Field setting, and
the Options, Clear, Sync Data and Start/Stop buttons. This will give more
ls
7.6.5 Zooming w
room on the screen for viewing the graphical display area. While the contro
are hidden, some of them may still be accessed by using a right-click as
described above. To restore the option controls to the left side of the screen,
right-click again in the graphical display area and choose Show Controls.
ith the XY Plot
You can zoom in on the graphical area of the XY Plot. Click and drag the
mouse to define a rectangle that becomes the “zoomed to” display area after
you release the mouse button. As soon as you are zoomed in on the graph, the
Undo Zoom button appears in the upper right corner of the display. Pressing
this button will remove the zooming and return the graph to its original display
configuration (zoom level).
If you stop the plot and then zoom in to a region, you can use a right mouse
click to drag the screen, and thus scroll to other locations of the graph at the
current zoom level.
7-41