Campbell Scientific RTDAQ Software - Manual (Page 42)

Section 4. The RTDAQ Main Screen
4.3 Clock/Program Tab
Selection of the Clock/Program tab brings up the Clock/Program screen.
RTDAQ displays this tab by default when first executed.
4.3.1 Basic Operation
In this screen you can see brief details about the currently selected datalogger,
including its name in the Network Map, its station name, its connection
information, and its response time settings. When connected, you can also
view the current time as given by the datalogger, as well as the time given by
the PC’s clock. You can set the clock on the datalogger to be synchronized
with the PC clock. You can also view the name of the current program
running on the datalogger. You can send a program or operating system to the
datalogger. You can also retrieve the currently running program to your PC.
4-6