Campbell Scientific RTDAQ Software - Manual (Page 163)

Section 7. Monitoring Data in Real-time
7.3.2 Displaying Tables on the Table Monitor
Use the Select Table drop-down box to select the desired tables to be
displayed. A list of tables available in the program currently running on the
datalogger to which you are connected is shown. You may select up to three
tables to be displayed, each in their own screen column. If you want only one
or two tables to be displayed, you may reduce the value in the Columns spin
box, which will also reduce the width of the screen.
7.3.2.1 Start and Stop
Once a table is selected for monitoring, press the Start button to begin
displaying the data for that table only. The number of records stored in the
selected table is shown below the table selection box in the Table Size area.
Each table has its own Start/Stop button. Press Stop to discontinue the
display of the current table’s data. You may need to scroll with the vertical
scroll bar to see the fields of interest from your selected table.
7-11