Campbell Scientific RTDAQ Software - Manual (Page 189)

Section 7. Monitoring Data in Real-time
In addition to the actual poin
The vertical scale on the left ts, the scaling is also shown for the x and y axes.
corresponds to the default y-axis, and the
horizontal scale at the bottom corresponds to the x-axis. A y-axis can also be
shown to the right of the points, if the graph is configured that way. To do this,
highlight the desired item in the Y Axis Values area, press Options, choose the
Trace and Display tabs, then choose the right axis using the Select Axis drop-
down box.
Once started, the graph is adding points as it receives them from the datalogger
via the communications server. While it runs, the Start/Stop button shows as
a Stop button.
If you wish to discontinue adding points to the graph (and also stop removing
the old points based on the # Points per Field setting), press the Stop button.
The graph will suspend its updates and the resulting fixed graph can be
examined for as long as is necessary. The button will now show as a Start
button again.
7-37