Campbell Scientific RTDAQ Software - Manual (Page 211)

Section 7. Monitoring Data in Real-time
If the FFT/Histogram screen is in the “started” state when you
choose Print Preview, the current snapshot will be displayed for
printing and the display will continue to display newer data in
the background.
You may choose the Print item to immediately send the current snapshot to the
selected printer without pre-viewing it. Selecting the Clear or Start/Stop
items performs the same function as pressing the corresponding button (see
button descriptions given above).
e
NOTE
Select Save Configuration to save the current FFT/Histogram configuration
(table, data, options, etc.) to a file or Load Configuration to load a previously
saved configuration.
Choose the Hide Controls/Show Controls to hide or show the items for
controlling the FFT/Histogram display that are shown on the left side of th
graph. Hiding these items allows more room for the graphical display for
enhanced viewing once all of the settings have been set to the desired
configuration.
7-59