Campbell Scientific RTDAQ Software - Manual (Page 157)

Section 7. Monitoring Data in Real-time
You may set options for all cells at once by right-clicking anywhere on the data
display area, choosing Select All and then pressing the Options button.
If no cells are selected when the Options button is pressed, only
the Setup tab of the Field Monitor Options screen will be
displayed. NOTE
After customizing your Field Monitor Options you may save that
configuration for easy retrieval at a later time from the Setup tab.
7.1.5.1 Display Tab
In the Display tab of the Field Monitor Options screen you can set the
number of decimal places for displaying data in the grid. After particular cells
of the grid are selected, then the number of decimal places for that selection
will be adjusted.
With this screen, you can set the strings to be displayed on the data display
when values are equal to boolean true or boolean false. You can also decide
whether to display the date on a timestamp. You can set justification to left,
center, or right for the field names and the data values in the grid.
7-5