Campbell Scientific RTDAQ Software - Manual (Page 290)

Section 10. Utilities
To run Split, select RUN | GO. The hourly data will be split out and stored in
hourly.prn. The results are displayed on the screen as shown below.
When Split is running on large files, the line counters will update
only every 1000 lines. NOTE
Close the Run window. If you wish to save this parameter file for future
reports, choose FILE | SAVE. The file will be saved with a .PAR extension.
10.3.3 Split Parameter File Entries
10.3.3.1 Input Files
The name of the Input File is entered in the space to the right of the Browse
button. The default directory is the working directory for Split (if the default
installation directories were chosen, this will be c:\campbellsci\splitw). If the
input file is not in the default directory, use the Browse button to find the input
file.
10-20