Campbell Scientific RTDAQ Software - Manual (Page 179)

Section 7. Monitoring Data in Real-time
If you right-click on a field in the Selected F
ons, a screen will appear lik
ields section of the Graph and
e this: choose Trace Opti
7.4.9.4.2 Using Marks on the Graph
You can select the Marks tab if you want markers to show on the graph and
control how they are shown. Marks can contain information about a specific
point, such as its value on the current y-axis or the timestamp that applies to
that point. Check the Show Marks check box to use marks on the graph.
Select the Round Frame check box if the corners of the mark should be round
instead of pointed (square).
Choose the Transparent check box if you wish the background of each mark
to be transparent (the same color as the graph background). Set the Draw
Every spin box with a value greater than 1 if you wish for only some of the
points to display an associated mark. A setting of 1 will display a mark on
every point. You can also choose the color and fill style of the box in which
the markings text is shown with the Color and Style selections. Use the Style
drop-down box to determine what information from each axis will be
displayed.
7-27