Campbell Scientific RTDAQ Software - Manual (Page 201)

Section 7. Monitoring Data in Real-time
monitor. This includes the use of the Histogram ou
the tables of the CRBasic program. tput instruction in one of
7.7.2 Displaying
-
Histograms
Connect to the desired logger in RTDAQ by clicking on the datalogger’s icon
and pressing Connect. Now choose the Monitor Data tab to make the real
time displays available, and choose the FFT/Histo button.
Now you will see the FFT/Histogram display window:
You may create mu
screens have been ltiple histogram windows in RTDAQ. After histogram
created, they can be brought to the front by using the drop-
dy exists,
window instead of creating a new one.
down list that becomes available on the FFT/Histo button. You will also use
this drop-down list to create histogram screens after at least one alrea
since pushing the FFT/Histo button at that point will bring the focus to an
existing histogram
7-49