SkyTrak 6036 Service Manual - Manual (Page 207)

Section 9 Hydraulic System
Model 6036/6036T S/N 9B0500 thru 14833 9-57
MA0602
Fig. 9.30 Steering Cylinder Exploded View (Old Style)
13
1 10
3
5
10
7
4
6
7
4
6
5
8
9
12
11
2
1. Tube
2. Piston
3. Rod
4. Gland
5. Rod Wiper
6. Z-seal
7. O-ring
8. O-ring
9. Crown Seal
10. Lockwire
11. Wear Ring
12. Locknut
KITS
13. Seal Kit, Steering Cylinder
(Includes Items 5 thru 11)
c. Cleaning
1. Discard all seals and lockwire. Replace with a
complete new seal kit.
2. Clean all metal parts in an approved cleaning
solvent such as trichlorethylene. Be sure to
carefully clean all cavities and grooves.
d. Inspection, Repair and Replacement
1. Check that rod (3, Fig. 9.30) is straight and
undamaged. If the rod is bent or damaged,
install new rod.
2. Inspect inside of tube (1) for scoring and other
damage. If there is any damage to the tube,
replace it with a new tube.
3. Remove small scratches on inside of the tube
with emery cloth of very fine grit. Use the
emery cloth with a rotary motion.
Notches (Old Style Only)