AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 119)

Tuning Guide 113
© 2014 AEM Performance Electronics
Set Throttle Range
The wizard displays a warning message to the user if the software is not connected to a
hardware target.
Live TPS Volts
Text and graphical representation of the raw analog voltage is shown.
Steps
Set TPS Volts Min
Press this button when the throttle pedal is fully released. This will write the current value of
Analog7 [V] to the Throttle_raw [%] Analog In conditioner and display the resultant value on
the TPS Min Volts: X.XX display.
Set TPS Volts Max
Press this button after the throttle pedal is fully depresses. This will write the current value of
Analog7 [V] to the Throttle_raw [%] Analog In conditioner and display the resultant value on
the TPS Max Volts: X.XX display.