AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 93)

Tuning Guide 87
© 2014 AEM Performance Electronics
Tuning Preferences
Calibration data is automatically saved to ECU flash memory at key off if the "Key Off Commit"
function is selected in the Tuning preferences wizard page. Proper power sequencing is critical
in order to avoid problems. If power is removed from both pins C1-10 and C2-50 (Infinity 8/10/12
hardware) before this action is completed, the ECU may become inoperable and require
reprogramming at AEM.