Nitrous arm switch setup, Speed & frequency – AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual User Manual
Page 186
Advertising
180
© 2014 AEM Performance Electronics
Infinity User Manual
Choose the input channel from the available selections in the drop down list. Use the table to
define the logic output. In the example above, the two breakpoints are used to define a function
where the input is OFF when the digital input pin state is low '0' and ON when the digital input pin
state is high '1'. The logic can be inverted by simply swapping the values in the N2O_Switch
column.
Advertising