Sensors, Sensors map sensor – AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual User Manual
Page 343
Advertising
Wiring, Pinouts and Schematics
337
© 2014 AEM Performance Electronics
Sensors
MAP Sensor
Optional AEM MAP Sensor Listing:
AEM P/N 30-2130-30 “MAP Sensor Kit, 2 BAR”
Typically used to measure intake, air box and crankcase pressures
AEM P/N 30-2130-50 “MAP Sensor Kit, 3.5 BAR”
Typically used to measure intake & exhaust back pressures
AEM P/N 30-2130-75 “MAP Sensor Kit, 5 BAR”
Typically used to measure intake & exhaust back pressures
Red Wire: 5V Reference
Black Wire: Sensor Ground
Green Wire: MAP Signal
Advertising