Barometric pressure setup – AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual User Manual
Page 175
Tuning Guide
169
© 2014 AEM Performance Electronics
Barometric Pressure Sensor Setup
Select input for barometric pressure sensor.
Baro Pressure Wizard Selection
Selecting this box will present a menu with multiple pre configured barometric pressure sensors
to choose from.
Baro Pressure Min Volts:
This sets the minimum voltage capable from a properly working sensor. Check the manufacturer
specifications for more information. Min value = 0, Max value = 5. Baro Pressure Max Volts must
be > Baro Pressure Min Volts. User entries that do not meet this criteria are not allowed.
Baro Pressure Max Volts:
This sets the maximum voltage capable from a properly working sensor. Check the manufacturer
specifications for more information. Min value = 0, Max value = 5. Baro Pressure Max Volts must