AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 26)

20
© 2014 AEM Performance Electronics
Infinity User Manual
Connection Menu
In the Infinity Tuner software, select the Connection drop down menu.
Connect to USB:
Connects to the ECU using the USB port. The ECU must be powered properly.
Disconnect:
This option will terminate the ECU USB connection.
Target Menu
In the Infinity Tuner software, select the Target drop down menu.
Undo:
Undo last commanded edit. Hot Key = Ctrl Z
Redo:
Redo last commanded edit. Hot Key = Ctrl Y
Commit modifications:
This action will update the non-volatile storage of the ECU with the users changes. The data that
would be saved on the ECU includes the following:
Table data changes.
Initial value changes.
"Predefined item" changes especially "Static" types.
Revert modifications:
Resets all data changed since the last time the calibration was "Committed." Once the "Commit"
is performed, the changes cannot be "Reverted." The user can make changes to the table data
while tuning and "Revert" the changes before "Committing." The user can always save the
calibration to a file as well.