AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 89)

Tuning Guide 83
© 2014 AEM Performance Electronics
Wizard Basic Setup
Wizard Design
The ECU setup wizard is designed to simplify the initial configuration of the Infinity ECU. AEM
recommends using the wizard only when connected to the ECU via USB with the power
on. Most of the setup wizards require the engine to NOT be running. Exceptions will be clearly
stated in the function descriptions.
The setup wizard contains general and detailed descriptions with each major function. The most
imperative functions are discussed below. Use the descriptions in the wizard to assist in the
completion of all other setup features. New setup wizard features are being added constantly.
Please follow the written descriptions on each wizard page as this document may not accurately
represent the features included in the most recent versions.
The Setup Wizard is a stand alone application that runs in conjunction with Infinity Tuner. This
software is updated periodically and its appearance and features may not completely match the
descriptions below. In the event of a conflict, refer to the descriptions and instructions on the
Setup Wizard pages themselves.
With the laptop connected to the Infinity ECU via USB and InfinityTuner connected, go to the
Wizard menu at the top of the InfinityTuner layout and select Setup Wizard. Alternately, the hot
key combination [ALT]-[w]-[w]-[w] will launch the setup wizard.