AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 376)

370
© 2014 AEM Performance Electronics
Infinity User Manual
Example System Schematics
Custom wiring harness projects should only be undertaken by experienced harness
builders. If in doubt, please contact AEM for recommendations.
For users wishing to build their own wiring harnesses from scratch, the following kits are
available to help.
30-3701 Infinity-8/10/12 Plug & Pin Kit
Bare necessities to begin a custom wire harness design. Includes 73- and 56-pin Molex MX123
harness connectors, terminals and sealing plugs, main relay and relay socket.
30-3702 Infinity-8/10/12 Mini-harness
This harness is intended to be used as a starting point by experienced harness builders. It saves
time by including basic power distribution features that can be expanded to suit many application
requirements. It allows the harness builder to populate the ECU connector with only the features
needed by the application. Includes 100 96" pre-terminated leads.
30-3703 Infinity-8/10/12 Mini-harness
This harness is intended to be used as a starting point by experienced harness builders. It saves
time by including basic power distribution features that can be expanded to suit many application
requirements. It allows the harness builder to populate the ECU connector with only the features
needed by the application.
30-3704 Infinity-6/8h Plug & Pin Kit
Bare necessities to begin a custom wire harness design. Includes 80-pin Molex MX123 harness
connector, terminals and sealing plugs, main relay and relay socket.
30-3805 Universal modular V8 harness system for Infinity-8/10 systems
The Infinity Universal Modular V8 Harness system consists of a universal core harness and
optional application specific extensions. It was designed with flexibility in mind. The harness
system includes many features and it can be used in many different applications.
30-3809 Universal modular V8 harness system for Infinity-6/8h systems
The Infinity Universal Modular V8 Harness system consists of a universal core harness and
optional application specific extensions. It was designed with flexibility in mind. The harness
system includes many features and it can be used in many different applications.
30-3705 Universal Mini Harness for Infinity-6/8h systems
This harness is intended to be used as a starting point by experienced harness builders. It saves
time by including basic power distribution features that can be expanded to suit many application
requirements. It allows the harness builder to populate the ECU connector with only the features
needed by the application.
The following schematics show examples for wiring a basic Infinity system. Examples are
included for both Infinity-6/8h and Infinity-8/10/12 hardware platforms. The power, ground and
accessory relay sections of the following schematics must be strictly followed to avoid