Apple Logic Pro X - Manual (Page 136)

Chapter 6 Work with projects 136
Use transport shortcut menus
Some transport functions are only accessible from shortcut menus. Both the Stop/Go to
Beginning button and the Play button in the control bar have shortcut menus with additional
transport functions.
Use the Stop button transport functions
1 Control-click the Stop/Go to Beginning button in the control bar.
2 Choose any of the following items from the shortcut menu:
•
Stop: Stops project playback.
•
Stop and Go to Left Locator: Stops playback. The playhead moves to the left locator position.
•
Stop and Go to Last Locate Position: Stops playback. The playhead moves to the last
locate position.
•
Jump Between Marquee and Project Start: Moves the playhead back and forth between the
marquee start position and the project start position, when Logic Pro is stopped. Only applies
if there is an active marquee selection.
•
Jump Between Cycle and Project Start: Moves the playhead back and forth between the cycle
area start position and the project start position, when Logic Pro is stopped. Only applies if
there is an active cycle area.
•
Jump Between Selected Region and Project Start: Moves the playhead back and forth between
the start position of the first selected region and the project start position, when Logic Pro is
stopped. Only applies if a region or folder is selected.
•
Jump Between Last Locate Position and Project Start: Moves the playhead back and forth
between the last locate position and the project start position, when Logic Pro is stopped.
Use the Play button transport functions
1 Control-click the Play button in the control bar.
2 Choose any of the following items from the shortcut menu:
•
Play Marquee Selection: Starts playback within a marquee selection. Playback stops at the end
of the selection unless Cycle mode is on.
•
Play Cycle: Starts playback from the left locator position when Cycle mode is on.
•
Play From Selected Region: Starts playback from the start of the first selected region.
•
Play From Last Locate Position: Starts playback from the last playhead position.