Apple Logic Pro X - Manual (Page 385)

Chapter 14 Edit the timing and pitch of audio 385
3 Choose Flex Pitch or one of the Flex Time algorithms from the Flex pop-up menu.
Turn on flex in the Audio Track Editor
1 Open the Audio Track Editor by doing one of the following:
•
Select an audio track in the Tracks area, then choose View > Show Editors.
•
Select an audio track in the Tracks area, then click the Editors button in the control bar.
•
Double-click an audio region.
2 Click the Flex button in the Audio Track Editor menu bar (or press Command-F).
Note: Click the Audio Track Editor’s workspace before using the key command, to make sure that
the Audio Track Editor has key focus.
A Flex pop-up menu appears to the right of the Flex button in the Audio Track Editor menu bar.
3 Choose Flex Pitch or one of the Flex Time algorithms from the Flex pop-up menu.
Assign the same flex algorithm to all audio tracks
m In the Tracks area or Audio Track Editor, hold down Shift while choosing a flex algorithm from the
Flex pop-up menu.