Apple Logic Pro X User Manual
Page 294
Chapter 10
Create a song arrangement
294
m
Set Nudge Value to Sample
m
Set Nudge Value to 1 ms
m
Set Nudge Value to 10 ms
Nudge regions by the nudge value
1
Select the regions you want to move.
2
Hold down Option and press the Left or Right Arrow key.
Nudge regions by a set value
Use one of the following key commands:
m
Nudge Region/Event Position Right by SMPTE Frame
m
Nudge Region/Event Position Left by SMPTE Frame
m
Nudge Region/Event Position Right by 1/2 SMPTE Frame
m
Nudge Region/Event Position Left by 1/2 SMPTE Frame
m
Nudge Region/Event Position Right by 5 SMPTE Frames
m
Nudge Region/Event Position Left by 5 SMPTE Frames
m
Nudge Region/Event Position Right by SMPTE Bit
m
Nudge Region/Event Position Left by SMPTE Bit
m
Nudge Region/Event Position Right by Tick
m
Nudge Region/Event Position Left by Tick
m
Nudge Region/Event Position Right by Division
m
Nudge Region/Event Position Left by Division
m
Nudge Region/Event Position Right by Beat
m
Nudge Region/Event Position Left by Beat
m
Nudge Region/Event Position Right by Bar
m
Nudge Region/Event Position Left by Bar
m
Nudge Region/Event Position Right by Nudge Value
m
Nudge Region/Event Position Left by Nudge Value
m
Nudge Region/Event Position Right by Sample
m
Nudge Region/Event Position Left by Sample
m
Nudge Region/Event Position Right by 1 ms
m
Nudge Region/Event Position Left by 1 ms
m
Nudge Region/Event Position Right by 10 ms
m
Nudge Region/Event Position Left by 10 ms
You can limit the movement of regions to either the horizontal or vertical axis by selecting
the Logic Pro > Preferences > General > Editing > Limit Dragging to One Direction In Tracks
checkbox. If you initially move a region left or right, movement is limited to the horizontal axis.
If you want to move it between tracks, release the mouse button, reselect the region, then drag
it up or down. While this preference is selected, you can override it by holding down Shift when
moving regions.