Apple Logic Pro X - Manual (Page 441)

Chapter 15 Advanced edit features 441
Clear the current Lane Set
Clearing a Lane Set resets a Lane Set to its default, containing a single lane for the
Volume controller.
Do one of the following:
m Choose Lanes > Clear Lane Set from the Step Editor menu bar (or use the corresponding key
command).
m Choose Clear Lane Set from the Lane Set pop-up menu in the inspector.
Delete the current Lane Set
Do one of the following:
m Choose Lanes > Delete Lane Set from the Step Editor menu bar (or use the corresponding key
command).
m Choose Delete Lane Set from the Lane Set pop-up menu in the inspector.