Apple Logic Pro X - Manual (Page 379)

Chapter 13 Add a drummer to your project 379
Open Drum Kit Designer
Do one of the following:
m In the Drummer Editor: Click the plug-in button (shows the default patch associated with the
drummer) at the bottom of the drummer’s card.
m In the inspector or Mixer: Click Drum Kit Designer in the Drummer track’s respective channel
strip slot.
Play drums and adjust kit piece settings
Drum Kit Designer shows a 3D representation of the drum kit for the currently loaded patch or
plug-in setting.
For all kits, you can play the drums; edit the pitch, sustain, and volume of each drum kit piece;
and exchange the kick and snare drums. When working with Producer Kits, you can additionally
exchange toms, cymbals, and hi-hat. Producer Kits also let you turn different microphones, such
as overheads or room mics, on or off.
Note: Producer Kits and some drums are only available after you download additional content.
Drum Kit Designer also provides additional settings for adjusting the gain of other instrument
pieces, such as the shaker, cowbell, and so on.
Play a drum
m Click a drum.
The first time you click any drum after opening the plug-in, one or two panels open. You can
exchange individual drums in the Exchange panel to the left, and edit individual kit piece
settings in the Edit panel to the right.