Apple Logic Pro X - Manual (Page 456)

Chapter 15 Advanced edit features 456
•
Plus button (+): Increases the number of transients in the selected area of the audio file, or
across the entire audio file. You can also use the Increase Number of Transients key command,
default assignment: Command-Plus (+).
•
Minus button (−): Decreases the number of transients in the selected area of the audio file, or
across the entire audio file. You can also use the Decrease Number of Transients key command,
default assignment: Command-Minus (−).
Create a transient marker in an audio file
m Click the waveform display with the Pencil tool.
A transient detection process is started for the audio material around the clicked position, and
the transient with the highest energy becomes valid and is marked. If no transient is found in the
catch area, a transient marker is created at the clicked position.
Move a transient marker in an audio file
m Drag an existing transient marker to another position.
Note: The new position may or may not snap to zero crossings, depending on whether or not
Snap Edits to Zero Crossings is chosen in the Edit menu. You can also Control-click to open a
shortcut menu and choose Snap Edits to Zero Crossings.