Apple Logic Pro X User Manual
Page 504
Chapter 16
Mix a project
504
Compare edited plug-in parameters with the original setting
You can audition your audio or instrument track through two variations of a plug-in.
1
Adjust any of the plug-in parameters.
The Compare button turns blue, indicating that you have made changes, but have not saved the
edited settings in the project.
2
Click the Compare button to listen to the setting that was originally saved with the project.
The Compare button turns black.
3
Click the Compare button again to switch back to the edited plug-in setting.
The Compare button again turns blue.
Copy and paste a plug-in setting
1
To copy the plug-in setting, do one of the following:
•
Click the Copy button in the plug-in window header.
•
Open the Settings pop-up menu in the plug-in window, then choose Copy Setting.
All parameter settings are copied into a plug-in settings Clipboard, which is independent of the
global Clipboard.
2
To paste the plug-in setting, do one of the following:
•
Click the Paste button in the plug-in window header.
•
Open the Settings pop-up menu in the plug-in window, then choose Paste Setting.
Reset a plug-in setting
m
In the plug-in window, open the Settings pop-up menu, then choose Reset Setting.
Save a plug-in setting
Do one of the following:
m
In the plug-in window, do one of the following:
•
Open the Settings pop-up menu, then choose Save Setting. This command overwrites the
existing plug-in setting.
•
Open the Settings pop-up menu, then choose Save Setting As. Name and save the new
setting. You can also create a folder location, which must be in the associated plug-in folder.
m
In the Library, click the Save button.
Create a default plug-in setting
m
In the plug-in window, open the Settings pop-up menu, then choose Save Setting As Default.
This setting will be loaded whenever that plug-in type is opened. You can also revert to this user
default setting at any point by choosing Recall Default Setting from the Settings pop-up menu.
Delete a plug-in setting
Do one of the following:
m
In the plug-in window, open the Settings pop-up menu, then choose Delete Setting.
m
In the Library, click the Delete button.