ElmoMC AC Input Digital Servo Drives-Bassoon Cable Kit User Manual
Cornet digital servo drive installation guide
Advertising
Table of contents
Document Outline
- 1. Safety Information
- 2. Introduction
- 3. Installation
- 1.10. Before You Begin
- 1.11. Unpacking the Drive Components
- 1.12. Mounting the Cornet
- 1.13. Connecting the Cables
- 1.13.1. Wiring the Cornet
- 1.13.2. Connecting the Power Cables
- 1.13.3. Connecting the Auxiliary Supply Cable (24 V)
- 1.13.4. Feedback and Control Cable Assemblies
- 1.13.5. Main Feedback Cable (FEEDBACK A)
- 1.13.6. Main and Auxiliary Feedback Combinations
- 1.13.7. Auxiliary Feedback (FEEDBACK B)
- 1.13.7.1. Main Encoder Buffered Outputs or Emulated Encoder Outputs Option on FEEDBACK B (YA[4]=4)
- 1.13.7.2. Differential Auxiliary Encoder Input Option on FEEDBACK B (YA[4]=2)
- 1.13.7.3. Single-Ended Auxiliary Input Option on FEEDBACK B (YA[4]=2)
- 1.13.7.4. Pulse-and-Direction Input Option on FEEDBACK B (YA[4]=0)
- 1.13.8. I/O Cables
- 1.13.9. Communication Cables
- 1.14. Powering Up
- 1.15. Initializing the System
- 2. Technical Specifications
- 1.16. Features
- 1.17. Cornet Dimensions
- 1.18. Power Ratings
- 1.19. Environmental Conditions
- 1.20. Cornet Connections
- 1.21. Control Specifications
- 1.22. Feedbacks
- 1.23. I/Os
- 1.24. Communications
- 1.25. Pulse-Width Modulation (PWM)
- 1.26. Single-Phase Operation
- 1.27. Mechanical Specifications
- 1.28. Compliance with Standards