System architecture, How to use this guide, System architecture 1.9. how to use this guide – ElmoMC AC Input Digital Servo Drives-Bassoon Cable Kit User Manual
Page 13
Cornet Installation Guide
Introduction
MAN-CORIG (Ver. 1.502)
13
1.8. System Architecture
Auxiliary
Power
Supply
PWM
Controller
Communication
RS 232 and CANopen
Power Stage
Protection
Current
Feedback
Incremental
Encoder
24 VDC
I/Os
Incremental Encoder
Buffered Output
or
Emulated Output
Resolver
Analog
Encoder
Auxiliary
Encoder
or
or
Figure 1: Cornet System Block Diagram
1.9. How to Use this Guide
In order to install and operate your Elmo Cornet servo drive, you will use this manual in
conjunction with a set of Elmo documentation. Installation is your first step; after carefully
reading the safety instructions in the first chapter, the following chapters provide you with
installation instructions as follows:
vv.
Chapter 3, Installation
, provides step-by-step instructions for unpacking, mounting,
connecting and powering up the Cornet.
ww.
Chapter 4, Technical Specifications
, lists all the drive ratings and specifications.
Upon completing the instructions in this guide, your Cornet servo drive should be successfully
mounted and installed. From this stage, you need to consult higher-level Elmo documentation
in order to set up and fine-tune the system for optimal operation. The following figure
describes the accompanying documentation that you will require.