JULABO SE-Z Heating Circulators - Manual (Page 18)

Preparations
18
5. Preparations
5.1. Installation
Heating circulators
• Place the unit on an even surface
on a base made of
nonflammable material.
Bridge mounted circulator SE-Z
• Place the bath tank in an upright
position.
1. Remove screw on both sides (transportation safety device in
the middle).
2. Extend the bridge and place it on the bath tank.
The bridge is extendable from 310 mm to 660 mm.
3. Adjust the bridge to the width of the bath tank.