JULABO SE-Z Heating Circulators - Manual (Page 33)

HE / SE
33
Level 2 Parameter level

oer
•
Confirm >NOW< with the key and the program
will start immediately

or
start at the set time under parameter (TIMER ).
Set time in the example below:
09. August 2009, 11:15 hrs


Submenu TIMER
Parameter level

set the time for the start of the program in the
submenu >TIMER<.

>TIME< hours/minutes (hh:mm), set both values one
after the other and confirm
•
hours flash, set by pressing
+
minutes flash, set by pressing
+

>DATE< day/months (TT/MM), set both values one after
the other and confirm.
•
day flashes, set by pressing
+
month flashes, set by pressing
+

>YEAR< year
•
Set the year with
and .


The program starts at the set time.

Display of time until start:
In line 3 the notice >TIMER< and the set values for „TIME“ and
„DATE/YEAR“ are alternately indicated

Check the correct setting of the internal real time clock if required
(see MENU CONFIG)