JULABO SE-Z Heating Circulators - Manual (Page 50)

Menu functions
50
Menu level 1

Level 2 Parameter level

Press the key if parameter is to be retained.
Correction function for parameters or values (prior
to OK).

or
•
The parameter flashes, switch by pressing
and

On level 2 a (I) is indicated for internal or an (E)
for external.
Example:

or
•
The parameter flashes, switch by pressing
and

>NO< Carry out an ATC calibration

>YES< return to standard operation after
calibration.

•
The parameter flashes, switch by pressing
and

A >1-point<, >2-point< or >3-point< calibration
can be carried out.
The selected calibration is indicated on level 2 by 1 or
2 or 3.

The value >TMPVAL< is only indicated

In addition the measured temperature value
>CALVAL X< is saved during the next step.

•
Integer digits flash, set by pressing
+
•
Decimal digits flash, set by pressing
+

If only a 1-point calibration is carried out, the following menu items are not
indicated anymore
Level 2 Parameter level

The value is only indicated