JULABO SE-Z Heating Circulators - Manual (Page 68)

Troubleshooting guide / error messages
68
Disturbances that are not indicated.
The electronic pump motor is overload-protected by an electronic current
limiter. If viscosity of the bath fluid is or becomes too high, the motor stops
running.
Warning:
Before exchanging the fuses, turn off the mains power switch and disconnect the
power plug from the mains socket!
Only use fine fuses with a nominal value as specified.
Fuses:
The mains fuses on the rear of the unit may easily be exchanged as
shown on the left.
Fine fuses (16)– T 16 A
Example:
Manufacturer Supplier Type Order No.
Schurter Schurter G-fuse insert SPT
T16A 5x20mm No. 0001.2516
Wickmann Wickmann G- fuse insert
T10,0A 5x20 mm No. 19195