Instrument components and specifications – Leica Biosystems IPC User Manual

Page 19

Advertising
background image

17

Leica IP C

3. Instrument Components and Specifications

Cassette type

Imprinting in Leica IP C

Leica Jet I *

without lid only

Leica Jet II *

with closed lid only

Leica Jet III *

with closed lid only

Leica Jet IV

ok

Leica Jet V

without lid only

Leica Jet Bx

with closed lid only

Leica Jet I Bx

with closed lid only

Leica Jet II Bx

ok

Leica Jet III Bx

ok

Leica Jet IV Bx

ok

Leica Jet V Bx

ok

Sakura Tissue

Tek MESH

without lid only

Sakura Tissue

Tek II

ok

Sakura Tissue

Tek III

ok

Cassette type

Imprinting in Leica IP C

Simport M 480

without lid only

Simport M 492

with closed lid only

Simport M 493

with closed lid only

Simport M 502

ok

Simport M 503

without lid only

Simport M 505

ok

Simport M 506

without lid only

Simport M 507

with closed lid only

Cellpath
System II Hex *

without lid only

* Recommended for printing barcodes.

Recommended print media for the Leica IP C

The use of other print media may result in unsatisfactory print quality and/or jamming of slides/

cassettes during the printing process!

If the slides/cassettes you are currently using are not listed above, please contact your local

Leica Microsystems’ representative.

The following cassettes have been successfully tested with the Leica IP C.

Cassettes of other manufacturers must be tested before use. The test must include the follow-

ing steps:

Mechanical compatibility with the instrument. Imprint quality.

Resistance of the ink against the reagents with which the imprinted cassettes come into con-

tact in the subsequent processes (refer also to

Chapter 3.3.4

).

Important!

Leica Biosystems assumes no responsibility whatsoever for any damages suffered as a conse-

quence of imprints of poor quality or imprints made with non-reagent-resistant ink.

Advertising