Leica Biosystems IPC - Manual (Page 42)

40 Instructions for Use V 1.9 RevD – 05/2013
Configuring the serial port:
1. Open the printer folder:
START --> SETTINGS --> PRINTERS
2. Right-click on the icon of the newly installed printer, a quick menu opens up.
Click on PROPERTIES....
3. The PROPERTIES window contains several tabs; select the PORTS tab.
4. The port selected during installation (COM 2 in the example here) must
be highlighted. Enable the button ENABLE BIDIRECTIONAL SUPPORT.
5. Click on CONFIGURE PORT... to open the PORTS dialog box. Select the
corresponding port and click on SETTINGS.... The SETTINGS FOR... dia-
log box opens up. Set BAUD RATE to 57600. Leave all other settings as
shown in Fig. 46 .
Caution!
Windows 2000 and XP do not
contain the PORTS page.
Fig. 46
4. Instrument Setup