Lenze E94AxHE Technology Application Electronic gearbox - Manual (Page 30)

9400 Technology applications | Electronic gearbox
Short setup
Step 3: Adding a slave axis to the project
30
L
EDS94TA10030xxxx EN 1.2 - 11/2009
4.5 Step 3: Adding a slave axis to the project
Use the copy&paste function in the project view for not having to enter all settings for the
slave axis once again:
1. Copy the master axis in the project view.
– For this, select the master axis, open the context menu (right mouse button) ,and
click Copy:
2. Paste the copy of the master axis into the project view.
– For this, select the topmost project element, open the context menu (right mouse
button), and click Paste:
3. Rename the copy of the axis pasted.
– All axes in the project view must have an unambiguous name. This is why the
following dialog box in which you are asked to rename the axis (e.g."slave axis")
appears automatically after pasting: