Lenze E94AxHE Technology Application Electronic gearbox - Manual (Page 35)

EDS94TA10030xxxx EN 1.2 - 11/2009
L
35
9400 Technology applications | Electronic gearbox
Short setup
Using the "Virtual master" function
1. Set control input Activate master function to TRUE.
– For this, click the white button, go to the I/O configuration for... dialog box in the
Constants tab and activate TRUE.
2. Assign control input VMas - start continuous operation e.g. to digital input DI8.
– For this, click the white button, go to the I/O configuration for... dialog box in the
Digital input terminals tab and activate Digital input 8.
3. Select Ramp: Continuous operation (C03570/2).
4. Select Master speed 1 (C03568/1).
Go to dialog: Overview
Virtual master