Lenze E94AxHE Technology Application Electronic gearbox - Manual (Page 69)

EDS94TA10030xxxx EN 1.2 - 11/2009
L
69
9400 Technology applications | Electronic gearbox
Parameter setting & configuration
Parameterisable function blocks
5.16.2 ClutchElectricalShaft
Is an instance of Function
L_LdClutchV  Virtual clutch ( 46)
Parameter Possible settings Information
C03665/1 0.010 s 130.000 Clutch in ramp
• Acceleration ramp for
synchronising to dnSpeedIn_s.
• Initialisation: 1.000 s
C03665/2 0.010 s 130.000 Decoupling ramp
• Deceleration ramp for
synchronising to dnSetSpeed_s.
• Initialisation: 1.000 s
C03665/3 0.010 s 130.000 Ramp for positive opening operation
• Deceleration ramp for positive
opening operation.
• Initialisation: 1.000 s
C03666 Character string Speed unit
• Read only
C03667 -214748.3647 unit/t 214748.3647 Reference speed
• Read only
• Reference value for selecting
speeds.
C03668 0.010 s 130.000 S-ramp time
• For limiting the jerk
• Initialisation: 1.000 s
C03670 -2147483647 2147483647 State
• Display of the bit-coded output
signal dnState.
C03672 -214748.3647 unit 214748.3647 Setpoint speed after decoupling
• Read only
• Is generated from the speed
signal dnSetSpeed_s.
C03673 -214748.3647 unit 214748.3647 Speed at the input
• Read only
• Is generated from the speed
signal dnSpeedIn_s.
C03674 -214748.3647 unit 214748.3647 Speed at the output
• Read only
• Is generated from the speed
signal dnSpeedOut_s.