Lenze E94AxHE Technology Application Electronic gearbox - Manual (Page 31)

EDS94TA10030xxxx EN 1.2 - 11/2009
L
31
9400 Technology applications | Electronic gearbox
Short setup
Step 3: Adding a slave axis to the project
4. Rename the copy of the controller.
– The Ambiguous name dialog box appears once again for the copied controller
because all controllers must have an unambiguous name in the project view.
– Enter e.g. "9400 HighLine (slave)" as controller name.
– Example project view in the »Engineer«: