MTS Acumen - Manual (Page 103)

The components you will need are: upper and lower platens, mounting bolts, and the 5 mm hex key.
You will need the beige spring for the test. This beige spring, as well as the other components shown
in the preceding photo were packaged with your Acumen at delivery.
2. Take safety precautions before putting your hands near the crush zone.
a) Ensure that High-Power Prohibit is on and exclusive control is off.
On the frame-mounted control, if High-Power Prohibit is not illuminated, press the High-Power
Prohibit button to turn it on. If exclusive control is on, press the Exclusive Control button to turn it
off.
b) Ensure that actuator power is off.
MTS Acumen ™ | 103
Running the Example Spring Test