MTS Acumen User Manual
Page 37
Advertising
Two-Column Load Frame
Description
Item
Actuator and power electronics (behind hood).
1
Columns on which the crosshead moves up and down.
2
Actuator rod.
3
Manual crosshead locks. (Note: crosshead locks must be in a fully locked position to run
a test.)
4
Frame-mounted control.
5
T-slot base plate.
6
Load cell mounted on table top (load cell can also be mounted on the actuator).
7
Crosshead lift.
8
Frame-mounted status light allows you to view system status at a glance. This status is
coordinated with the MP software System panel. Status is indicated by the following colors
and a blinking or solid light:
9
AC power to the frame is off.
Unlit
MTS Acumen
™
| 37
System Introduction
Advertising