MTS Acumen - Manual (Page 74)

Description File Type
by opening an existing Test Template file, which automatically copies the
test definition information and adds a container for test data.
MTS TestSuite Test Procedure Icon
When you run a test report, data is sent from MPX to an Excel spreadsheet.
The spreadsheet can be viewed even if you do not have Excel on the interface
PC using the Excel viewer. Reports
Using Controller and MPX Applications in a Workflow
The basic workflow to perform tests with FlexTest and MTS TestSuite software is as follows:
Note:
If you have created a desktop shortcut that automatically opens the MP application, the controller,
and a specific Station Configuration, the following workflow begins with Step 5. For information
about setting up desktop shortcuts, see the Pretest Station Checkup section.
1. Use the Station Manager application to open a Station Configuration.
2. Select a Parameter Set (which includes specific Sensor Calibration files) for your Station Configuration.
3. Minimize the Station Manager application on your desktop.
4. While keeping the Station Manager application running, open the MPX application.
5. Select the Test Procedure appropriate for your test.
6. Using MPX, perform the tasks in the Set Up category of the Explorer.
7. Using MPX, select a new test run and start the test from the control panel.
8. If desired, create a Test Report with the MPX application.
Using MTS Applications and Files to Run Tests
74 | MTS Acumen ™
Key Concepts