MTS Acumen - Manual (Page 55)

Description Name Item
Select a control mode. Control Mode 3
Applies the manual command to the actuator. Command 4
If necessary, click the cog wheel icon to open the Slider
Settings window, where you can change the slider-bar
range.
If you select a Master Command Group that has individual
channels at different Command values, this control shows
the highest and lowest Command values for the Group.
Additionally, it shows pointers and extension/retraction
symbols that indicate the highest and lowest Command
values. Pointers lock together once they have been used
to move the Group to a common Command value.
To modify the slider settings, click the cog wheel icon next to the Command box. The Slider Settings
window opens.
Slider Settings Window
Description Name Item
Select how far the actuator will move when you press the
Retract or Extend button on the Manual Control panel in
the increments specified in the Resolution box. Jog Increment 1
MTS Acumen ™ | 55
System Introduction