SATEC PM180 Operation Manual - Manual (Page 32)

‎Chapter 3 Using the RDM Data Display
30 PM180 Substation Automation Unit
Page Label Parameter Units LED
Hi Maximum total kvar kvar/Mvar
9 Maximum volt demand V1/V12 V1/V1-2 - kV1/kV1-2
Maximum volt demand V2/V23 V2/V2-3 - kV2/kV2-3
Hd Maximum volt demand V3/V31 V3/V3-1 - kV3/kV3-1
10 Maximum ampere demand I1 A1
Maximum ampere demand I2 A2
Hd Maximum ampere demand I3 A3
11 Maximum sliding window kVA demand kVA/MVA
Power factor (import) at maximum kVA demand PF
Hd Maximum sliding window kW import demand kW/MW
Power Quality Display
Press the THD/TDD key. The THD or TDD LED illuminates. Use the UP/DOWN
arrow keys to scroll through harmonics measurements.
The following table lists the available display pages. Note that voltage harmonics
readings are phase-to-neutral in 4LN3 and 3LN3 wiring modes, and phase-to-phase
in all other modes.
Page Label Parameter Units LED
1 THD V1/V12 V1/V1-2 - kV1/kV1-2
THD V2/V23 V2/V2-3 - kV2/kV2-3
thd. THD V3/V31 V3/V3-1 - kV3/kV3-1
2 THD I1 A1
THD I2 A2
thd. THD I3 A3
3 TDD I1 A1
TDD I2 A2
tdd. TDD I3 A3
4 K-Factor I1 A1
K-Factor I2 A2
HF K-Factor I3 A3
5
1 Pst V1/V12 V1/V1-2 - kV1/kV1-2
Pst V2/V23 V2/V2-3 - kV2/kV2-3
PSt Pst V3/V31 V3/V3-1 - kV3/kV3-1
6 1 Plt V1/V12 V1/V1-2 - kV1/kV1-2
Plt V2/V23 V2/V2-3 - kV2/kV2-3
PLt Plt V3/V31 V3/V3-1 - kV3/kV3-1
Energy Display
Press the ENERGY key. The MVAh, Mvarh, or MWh LED illuminates. Use the
UP/DOWN arrow keys to scroll through energy measurements.
The following table shows energy display pages.
Page Label Parameter Units LED
1 Ac.En.
IP.
MWh import MWh
2 rE.En.
IP.
Mvarh import Mvarh
3 AP.En.
MVAh MVAh
4 Ac.En.
EP.
MWh export MWh
5 rE.En.