Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 37)

PowerMonitor 1000 Unit 37
Rockwell Automation Publication 1408-IN001E-EN-P - September 2013
9. Type N to return to the main setup menu.
The HyperTerminal communication tool exits the setup menu after two minutes of
inactivity. To resume, press Enter three times.
Use the Web Interface
You can use an Internet browser to view data and change configuration settings on your meter.
Follow these steps to use the Web interface.
1. Use a computer that has network access to the power monitor, open your Internet
browser, type the unit IP address in the address field, and press Enter.
The power monitor’s home page displays in your browser.
The home page displays general information about the power monitor. The navigation
menu is on the left.