Rockwell Automation 1408-EMxx PowerMonitor 1000 Unit - Manual (Page 50)

50 PowerMonitor 1000 Unit
Rockwell Automation Publication 1408-IN001E-EN-P - September 2013
Results
Demand metering results may be viewed using the following methods:
• Web interface
• LCD display
• Communication
Demand results are not available via the HyperTerminal communication tool.
Commands
• Controller command (EOI signal)
Related Functions
• Status inputs
• Time of use log
• Configuration lock
Power Metering
This function applies to catalog numbers 1408-TR1 (power factor only), 1408-TR2, and
1408-EM3.
Metered Parameters
The power monitor calculates and returns four-quadrant power measurements including these:
• L1, L2, L3 and Total True Power Factor, percent lagging (-) and leading (+)
• L1, L2, L3 and Total Real Power, kW
• L1, L2, L3 and Total Reactive Power, kVAR
• L1, L2, L3 and Total Apparent Power, kVA
Only total three-phase power results are provided when Direct Delta or Open Delta wiring
modes are selected.
The
Magnitude and Direction of Power Quantities chart indicates the relationship between the
magnitude and direction of the power quantities and the numeric signs used by the power
monitor.