Rockwell Automation 1203-SM1 SLC to SCANport Communication Module User Manual
Page 20
Advertising
3–2
Using Basic Mode
Publication 1203–5.9 –– October 1996
Figure 3.1
Example APS Screen
Highlight the processor
you want to use. For
example, 1747–L532.
4. Press the F2 key.
5. Depending on your processor and version of APS, you may be
asked to enter the operating system that your processor uses.
6. Press F5 to configure the I/O. The screen shown in Figure 3.2 is
displayed.
Figure 3.2
Example I/O Configuration Screen
Advertising