Rockwell Automation 1203-SM1 SLC to SCANport Communication Module - Manual (Page 92)

SCANport Messaging B–26
Publication 1203–5.9 –– October 1996
The response message (N11 file) has the same structure as the
request message with a few changes. If an error occurred while
writing one of the parameters, the high bit of that parameter number
is set and the second word of the pair contains an error code. If the
high bit of the parameter number is not set, the second word of the
pair contains a zero.
Figure B.18
Example of Scattered Write
address 0 1 2 3 4 5 6 7 8 9
N10:0 0034 0093 0000 0000 000c 0001 0000 0002 0000 0003
N10:10 0000
address 0 1 2 3 4 5 6 7 8 9
N11:0 0034 0093 0000 0000 000c 0001 0078 0002 0000 0003
N11:10 0000